KS21-OUTRIG is a set of two stability bars for L-Acoustics KS21. Secure KS21-OUTRIG at the bottom of a KS21 array to improve the stability of the array. The use of KS21-OUTRIG is mandatory when A15 Wide/ Focus or A10 Wide/ Focus are stacked on top… Read More
A-TILT is a site angle adjustment accessory that interfaces between L-Acoustics KS21 and A15 Wide and A15 Focus in a stacked array. It is used in combination with two KS21-OUTRIG under KS21 to ensure stability.
The KS28-BUMP is a lifting beam for flying up to 16 L-Acoustics KS28 subwoofers. KS28-BUMP provides two sets of pickup points to choose from depending on the position of the lifting points. In addition, two sets of holes are available to implement a secondary safety.
KIET II is a rigging accessory compatible with the L-Acoustics Kiva II rigging system. It is delivered with a removable 35 mm pole socket and can be used to mount up to three Kiva II on a pole.
KIVA-PULLBACK is used to implement pull-back configurations with up to nine L-Acoustics Kiva II.
KIBU II is a rigging structure designed to fit the L-Acoustics Kiva II rigging system in flown configuration. 13 pickup points are available.
KIBU-SB is a rigging frame for flying arrays of L-Acoustics Kiva II cabinets and to interface Kiva II to SB15m. Each side of the rigging structure is designed to fit one enclosure type. KIBU-SB provides 13 pickup points for flying SB15m and 14 pickup points for flying Kiva… Read More
The M-BAR extension bar is a complementary rigging element for L-Acoustics M-BUMP. Optionally used as a single element or in pair in flown configurations, it will extend the site angle capability of Kara II and SB18 arrays.
The L-Acoustics M-BUMP rigging structure has been designed to fly or stack the Kara II enclosures as a variable-curvature, vertical line source array. M-BUMP also allows Kara II to be rigged to an SB18 subwoofer array.
The K1-DELTA is a rigging accessory for rear attachment of 2 motors to K1-BUMP pr K2-BUMP.
